Sample Template Example of Excellent Curriculum Vitae / Resume / CV Format with Career Objective for BE. in Mechanical Engineering with 27+Years Work Experience in Word / Doc / Pdf Free Download
Download Resume Format
R E S U M E
Name : Asif Akhtar (Indian
Nationality)
Qualification : Degree in Bachelor of Mechanical
Engineering (1973 to 1978 - Madras University, India )
Experience : 27 years as Senior Engineer / Engineer in
Coal, Gas & Oil Fired Government Steam Thermal
Power / Gas Turbine /
Desalination & Potable Water Construction Projects & Operating Plants
in India & Saudi Arabia in Project
, Commissioning, Testing, Maintenance & Procurement fields related to Electric Power Generation, Desalination & Utilities
(Drinking/Potable Water, Chemical & Chlorination Treatment Plant, Sea Water
Pumping System, Oil Tanker / Jetty Facility etc.) in
Rotating Machineries & Stationary Equipments as detailed below:
Maintenance Field:
From : 26.06.2004 to 11.02.2006
(1 Year
7 Months)
Company : Power
& Desalination Utility Company, Saudi Arabia
Position : Maintenance Section Head (Supervisor) Power
Generation & Auxiliaries.
From : 15.05.89 to 31.05.99 & 01.07.2002 to
12.01.2004 (11 Years 7 Months)
Company : Saline
Water Conversion Corporation, Ministry of Electricity & Water , Saudi Arabia
Position : Mechanical
Maintenance Engineer (Shoaiba Power 840 MW & Desalination Plant - Phase 1
& 2)
From : 01.05.82 to 30.12.87
(5
Years 7 Months)
Company
: 630 MW Tuticorin Thermal Power Station,
Tamilnadu State
Electricity Board , India
Maintenance Field Activities include Fault
Investigation / Diagnosis, Complete Disassembly, Parts
Inspection, Measure Dimensional Limits / Clearances, Reassembly and Alignment.
Inspection, Measure Dimensional Limits / Clearances, Reassembly and Alignment.
Rotary
Equipment: Steam
Turbine & Gas Turbine, Rotary & Reciprocating Air Compressor,
Centrifugal / Gear / Reciprocating / Horizontal / Vertical Pumps, Boiler Feed
Water Pumps, Mechanical Seals, Dozing Pumps, F.D. & I.D. Fans &
Blowers, Oil Centrifuge, Gas Air heater, Soot Blowers, Conveyor & Feeder,
Equipments related to Water Treatment Plant, Fuel Oil, Chlorination System.
Stationary
Equipment: Boiler
Pressure Parts, Steam Air heaters, Desalination Stage Evaporators, Shell &
Plate Type Heat Exchanger, Safety Valves, Pressure Seal Valve, De Aerators,
Storage Tanks.
§
Disassemble, Inspect, Overhaul,
Reassemble & Commission Steam Turbine (Fuji , Japan
Valves, Governor Valves, Lubricating & Seal Oil Pumps & Boiler Feed Water
Pumps (Ebara , Japan
§ Disassemble Overhaul, Reassemble &
Commission Steam Turbine (BHEL, Indian
make) & Accessories.
§
Boro
Scope inspection, Combustion Inspection, Hot Gas Path Inspection & Major
Overhaul of Gas Turbines
Job Responsibilities:
§ Conduct
Maintenance Functions & Spare Parts Management under SAP / MMS environment.
§ Conduct Engineering Analysis for Repair /
Trouble Shoots, Rectify & submit Technical Report.
§ Supervise Maintenance Activities on Daily
Defects, Breakdown, Routine, Predictive, Major Shut Downs & commissioning
assisted with team of Engineers, Foreman & Technicians.
§ Plan, Prepare Work Scope, Activities
required for Major & Minor Overhauling, Preventive Maintenance Tasks &
arrange Man Power. Review Technical Packages, Quotations & finalize
Contract Award.
§ Do engineering on Plant / Equipment Break
down & Inefficiency Problems & prepare documentation.
§ Prepare Technical Specification / Data
Sheets for modification of Plant Equipments.
§ Prepare Specifications, Data Sheets for ordering new equipments, Spares,
Engineering Packages Review,
Approve
Quotations. Accept / Reject Ordered Equipments & Spares at Plant Stores.
§ Supervise & Evaluate sub ordinate
Engineers, Foreman, Technicians Efficiency & skills.
§ Implement Plant Management Programmes &
Targets with Other Department Engineers.
§ Identify Equipment Spares for ordering &
Send Purchase Request with Specification & Data Sheets.
§ Conduct Safety Walk through
Inspection, implement Safety requirements & convene Safety meeting.
§ Initiate plans & proposals for
Staff training needs on Technical, Management & Safety disciplines.
Achievements:
1)
Identified & Rectified Boiler Soot Blowers
Non-retracting problem which remained as Chronic issue for 3 years prior to my
joining with Company.
2)
Established system to initiate Procurement Process
to order Equipment Spares & Consumables
in order to keep Minimum Inventory.
3)
Modified Dozing Pumps Stuffing Box Gland Sealing.
This eliminated frequent loose priming & improper dozing problems which was
a chronic issue for long time. This resulted to stop ordering Original
Manufacturer Costly Spares & improved reliability & availability of
Dozing Pumps.
Project Erection, Engineering,
Testing & Commissioning Field:
From : 01.06.1999 to 30.06.2002 (3
Years)
Company : Saline Water Conversion Corporation, Ministry
Of Electricity & Water ,
Saudi
Arabia
Position : Mechanical
Engineer in Heavy Fuel Oil Fired Shoaiba Power & Desalination Plant (PHASE
2).
EQUIPMENTS ASSOCIATED FOR ERECTION, TESTING
& COMMISSIONING:
§ 5 Boilers (Doosan Co., Korea
§ Steam Turbine - Generators (ABB ALSTOM), generating 5 x 112 MW = 560 MW Electric Power.
§ Power Plant
Auxiliaries System:
Potable & Sea Water / Water
Chemical Treatment / Fire
Fighting / Fuel
Oil Unloading, Storage & Supply /
Instrument & Service Air Compressor (BECHTEL , USA
Job Detail:
§
Prepare
Erection, Pre Commissioning, Commissioning Inspection Check Lists to implement
& follow
In Project & Plant Start up activities.
§
Inspect
Contractor activities for strict adherence to Project Specification &
Quality Control.
§
Monitor
& Coordinate Contractor Performance, Raise & Update Deficiency Reports,
and Punch List.
§
Scrutiny
Erection / Safety / Commissioning / Mechanical Completion Certificates.
§ Review P & I, As Built Drawings,
Prepare Project Documentation & Control.
ACHIEVEMENTS:
§ Modify
Operation &
Maintenance Manuals submitted by Contractors to improve Technical Quality.
§
Prepare Spare
Parts & Consumables for initial 3 Years operation & Annual
requirement.
From : 27.04.1979 to 30.04.1982 (3
Years)
Company : Tuticorin Thermal Power Project (3 x 210 = 630
MW), India .
Position : Project
Mechanical Engineer in Heavy Fuel Oil Fired Power Plant.
EQUIPMENTS ASSOCIATED FOR ERECTION, TESTING
& COMMISSIONING:
§ Sea Water Pumps & associated equipments
for Turbine Exhaust Condenser Cooling Water System.
§ Cooling Water Pumps & associated
equipments for Station Bearing Cooling Water System demand.
§ Instrument & Service Air Compressors for
Station demand.
Job Detail:
§
Inspect,
arrange & supply Equipments, Materials to Contractors, Testing &
Commissioning.
§
Supervise
Contractor activities to carry out jobs as per Project Specification & Work
Scope.
§
Co
Ordinate with various Project functionaries & participate in Project
meetings to smoothly & timely
Project Completion &
handing over to Operation & Maintenance Team.
§
Respond
to Project Technical Audit & Budget Committee requirements & comments.
§
Collect
/ prepare / Maintain Technical Documents, Manuals, Commissioning records.
§
Contractor
Bill claims measurement, submittals & settlement.
§
Hand
over commissioned equipments with Technical records to Operation &
Maintenance Department.
Procurement & Inventory Field:
From : 01.01.88 to 30.04.89 (On Promotion from another
Power Plant) (1Year 4 Months)
Company : 840 MW Mettur Thermal Power Station, Tamilnadu State
Govt. Electricity Board , India
Position : Senior Procurement Engineer in Coal & Heavy
Fuel Oil Fired Mettur Thermal Power Plant.
Job Detail
§ Prepare Specification, Enquiry & Float
To Manufacturers / Suppliers (Local & Foreign)
§ Tender receipt, Prepare Comparative
Statements, Technical Acceptance & Finalize Purchase Orders.
§ Follow Up With Stores / Finance / Plant
Departments / Suppliers For Delivery Schedule.
§ Stock Control, Spares Inventory &
Inspection in Plant Stores.
From:
03.10.78 to 23.04.79 (6 Months)
Mechanical Engineer Trainee at M/s.
Kavery Engineering Industries Ltd., Trichy, South India .
TRAINING: I was trained for Saudi Power & Utility Company
requirement to achieve Certification of Quality
Management system &
Environment Management System leading to ISO 9001 & 14001.
PERSONAL DETAILS:
Resi. Address: # 21/D,
Fourth Main Road, Jilam Nagar, Trichy – 620047, Tamilnadu, India.
Indian Home Telephone: 00 91 431 2321340
E- Mail Ref:asif_akhtar@hotmail.com
Joining Time / Availability: Possible To
Join At Any Time.
Licence: Possess Indian Car & Motor Bike
Driving License.
Marital Status: Married.
OTHER REMARKS: Possess
basic Computer skills with no specified qualification.
S. HUSSAIN AHAMED B.E. (Mech. Engg.) DATE: 03/2006
Download Resume Format
.JPG)
0 comments:
Post a Comment