Electrical Engineer Resume Latest Template in Word Format Free Download

Sample Template Example of Beautiful Excellent Professional Curriculum Vitae / Resume / CV Format with Career Objective, Job Profile & Work Experience for Freshers & Experienced in Word / Doc / Pdf Free Download

DAKOTA  TREMBLAY

309 High Range Road , Londonderry, New Hampshire 03001 Residence: (603) 437-9876  E-mail dakota@myfairpoint.net

POSITION:   SENIOR ELECTRICAL ENGINEER - R&D HARDWARE DESIGN

SUMMARY:

            I am a very versatile and experienced hands-on hardware electrical engineer with a broad background that adds value through skills in designing instrumentation electronics, electromagnetics, analog / digital / mixed signal / DC-DC Converters, embedded hardware and systems design. Strong in advanced mathematics, analytical, laboratory and practical skills from white paper, marketing requirements, business constraints to factory floor and customer support.  Past focus on technologies in, commercial, scientific, electromagnetic, aerospace, optical, undersea applications. I will bring my work based on fundamental physics, mathematics and engineering disciplines to companies in leading edge technologies and challenging creative projects. Accustomed to a fast paced commercial, R/D environment whereby advanced engineering and business practical must always meet.

SKILLS AND BACKGROUND :

·    Electronics: Analog / Digital /  Mixed Signal / RF / Instrumentation / Systems Design / Low Noise Receiver Circuitry, Data Acquisition, DC-DC Converter Power Supply Design (Buck, Boost, Flyback, SEPIC),  Precision Active Filters, Analog Signal Processing, RF Power, Scientific Instrumentation / Industrial Process Control / System Architecture Design, Circuit Modeling SPICE & Mathematica

·    Power Electromagnetics:  Custom Transformers / Inductors / RF Coupling Networks to Transducers

·    Underwater Acoustics:  Side Scan Sonar  / Systems Design, Chirp FFT Autocorrelation Sonar Signal Processing, Transducer Electronics, Low Noise Sonar RF Receivers, Three Axis MEMs-Fiber Optic Gyro / Accelerometer Motion Sensor and Micro-controller / High Power Sonar  RF Transmitters, Switching Power Supply Design, Ancillary Motor Drive Actuators and Magnetometers

·    Embedded Systems:  PIC /DSPic /Stellaris ARM Cortex M3 Micro-Controllers in C/ Assembly, Xilinx Sparten FPGA  System Interface Anti-Alias Filters/Delta-Sigma A/D,  Altera Cyclone II FPGA in Verilog, DSP Wavelet Studies

·    Avionics:  High Reliability Aircraft Systems: Reduced Vertical Separation Minimum (RVSM) Altimeter Boeing 747, LearJet,  Flight Safety  Fault Tree Analysis Cockpit Instrumentation / Aircraft Power Systems

·    Space Sciences:  STS-39 “Discovery” Payload USAF -Orbiter Fuel Cell Power Systems Integration / Payload Air Force Geophysical Lab ---Fight Hardware / Software Design / Systems Integration / Safety Reviews / Flight Operations NASA Goddard Space Flight Center / Kennedy Space Center

·    Government Contract R/D:  Laser Effects / Optics Electronics / Radiometry, IR and Cryo IR, Visble,UV / Photometry / Interface Electronics, Fiber Optics, Laser Driver / Receiver Electronics, Optics Front End Analog / DSP Signal Processing

·    Environmental Instrumentation:  (SBIR Startup Company): New Product Design: Optical Pyrometer Electronics and Thermodynamic Modeling / Firmware NH3 NOX Control - Coal Fired Utility Boilers  / Diode Laser Based Spectral Line Absorption Gas Detector Electronics - Oil Refineries

·    Documentation: Specification and Test Plan Preparation – Manufacturing, Marketing and Customer Support, Configuration Management using SmarTeam, Oracle, Omnify.  Sustaining Engineering.

EXPERIENCE:

2010                            SPYGLASS PARTNERS                                                       Londonderry,  NH 

Senior Hardware Design & Sustaining Engineer – Contracting

American Science and Engineering, Client, Billerica, MA

Six month assignment with involving Homeland Security, Industrial and Military Z-backscatter X-Ray systems and safety process control. 6 MeV Linear Accelerator systems control.  Assignment successfully completed and closed out by contract terms.

2006 – 2010                L3 COMMUNICATIONS-KLEIN ASSOCIATES INC.                Salem, NH  

                                    Senior Hardware Design Engineer – Sonar Systems

                                    Responsible for side-scan, bathymetric, and sub-bottom profiler sonar design and                                                          sustaining engineering 

·        Performed mathematical modeling of Tonpiltz audio projector characteristics and initial acoustic pool and sea testing for new Model 3000SBP Sub-Bottom Profiler. Produced prototype utilizing custom narrow BH hysteresis Metglas 2KW transformer technology with >2 KW power FET transmitter.

·        Designed power MOSFET designs for synchronous switching Buck / Boost / SEPIC DC-DC converters and complementary N-N and P-N channel power MOSFET 1KW Class E totem pole transmitters to sonar transducers.

·        Modified and delivered to the U.S. Navy two existing Model 3000 Deep tow-fish with a custom titanium body to accept custom deep water transducers for depths to over 1000 meters. Performed custom output transformer and RF output coupling matching network design for high Q transducer characteristics.

·        Designed a 3 axis motion / attitude sensor for bathymetry image stabilization for the Model 5000V2-Bathy variant and a new product the Model 5900 tow-fish. This product utilizes a PIC controlled MEMs technology gyro and accelerometer as well as a coupled vendor supplied fiber optic gyro for higher pitch, roll and yaw resolution.  Performed all hardware design and low level embedded software driver design and systems integration. In addition designed a DC-DC buck switching power supply to operate this device.

·        Designed and developed the Model S3900 Search and Recovery tow-fish for 900 KHz high resolution side scan sonar with design of custom output transducer matching. This product has resulted so far in over $2.5 million in sales.

·        Designed and developed a low noise, differential front end side-scan sonar receiver for new Model 5000V2 tow-fish the performance that provides fine grain imaging to ocean thermal noise limit.

·        Performed the system design for several autonomous underwater vehicle (AUV) modules utilizing Klein side scan sonar electronics and transducers as well as a PC-104 based data acquisition system.

·        Performed significant Sustaining Engineering duties on existing products.  Of note were responder / transponder add-ons particularly one of which was a legacy “troubled” program for a survey agency of the U.S. Navy.  This program involved an EMI / EMC issue which was fixed and turned around saving the program and resulted in five million dollars of sales.

·        Participated in many sea trials on the R/V Gulf Challenger (UNH) for various programs. Such work entailed below deck laboratory and “deck hand” duties.

2004 - 2006                 WILCOM INC.                                                                     Laconia, NH                                       

                                    Senior Electrical Engineer – Fiber Optic Test and DSL Products Equipment Sustaining

Responsible for analog and embedded microcontroller electronic sustaining engineering for fiber optic test equipment and DSL splitters.

2000-2003                   SUNRISE LABS INC.                                                          Auburn, NH                         

                                    Principal Engineer / Consulting, New Product Development

Responsible for fundamental engineering systems analysis and electronics hardware design of new and existing products for Sunrise clients. Responsible for consulting, electronics / firmware design, marketing technical support, technical writing, proposals, specification creation, project scheduling and costing

1996-2000                   KOLLSMAN INC.                                                                Merrimack, NH                                

                                    Principal Engineer in Avionics

·        Responsible for avionics system design and development of new technologies applied to aircraft retrofit for the commercial aircraft market

·        Developed basic systems design of a new product line, the Digital Altimetry Systems (DAS) for RVSM from initial concept through to FAA approval, Technical Standards order and Supplemental Type Certificate for Boeing 747 Series 200 aircraft and Learjet aircraft. Performed conductive emissions testing for aircraft power systems.

·        Performed test fixture design for new FLIR based Enhanced Vision System (EVS) aircraft navigational system.

·        Produced mathematical analysis and characterization of solid-state pressure transducers and related static source error correction algorithms.

·        Performed closed control loop analysis of high altitude static/pitot simulator using VSIM.

·        Produced fault tolerant systems safety assessment using Fault Tree techniques.

·        Assisted in on-board Boeing 747 flight tests under actual flight conditions for FAA certification.

·        Performed study and development of new cockpit display technology through an independent research and development program utilizing advanced liquid crystal display and thin film photoluminescence display disciplines.  Produced internal company white paper on results.

1992-1996                   PSI ENVIRONMENTAL INSTRUMENTS  /  SPECTRUM DIAGNOSTIX INC.

                                    Lead Product Development Electrical Engineer                  Andover , MA 

·        Co-founding member of an environmental instrumentation company as a SBIR commercialization spin-off of Physical Sciences Inc. Responsible for all electronics design and development of new products.

·        Designed and developed the optical-analog receiver electronics and the real time embedded systems process control software for GasTemp^TM, an optical pyrometer used for NH₃ NOX control in coal fired utility boilers. This product was sold to Diamond Power Specialty Systems Inc. , Ohio, USA.

·        Designed from initial white paper conception through original R&D to manufacturing all electronics / firmware for new product line SpectraScan^TM , an IR based gas spectrum sensor and analyzer. Designed all of the optical-analog / receiver hardware for this effort which resulted in a $5.6 million acquisition by Bovar Western Research, Calgary, Alberta, Canada

1987-1992                   PHYSICAL SCIENCES INC.(PSI)                                                   Andover, MA              

                                    Senior Electrical Engineer in Space Sciences and Laser Effects

·        Responsible for electronics support to research scientists in space sciences, radiometry and laser effects.

·        Designed and developed all of the analog / cryo-cooled-chopper stabilized electronics and embedded systems flight software for the Gaseous Luminosity over Optical Surfaces (GLOS) payload delivered to the Air Force Geophysical Laboratory that flew on the STS-39 “Discovery” Space Shuttle. This instrument performed successfully for 9 days in orbit. Conducted flight support operations at the NASA Goddard Space Flight Center and Kennedy Space Center.

·        Performed systems design on the Critical Ionization Velocity (CIV) experiment which flew on the same mission.

·        Designed AT&T based DSP32C hardware and software in C for real-time laser based measurements of Couette flow turbulence (Vorticity Optical Probe) for a U.S. Navy contract.

·        Designed and built a variety of infrared and visible radiometers for study of laser effects.

1985-1987                   WILCOM PRODUCTS, INC.                                              Nashua, NH            

                                    Electrical Engineer  Digital Signal Processing

Responsible for the electronics instrumentation design and DSP feasibility study (AT&T DSP-3C2 in pipelined assy)

1981-1985                   MEGAPULSE INC.                                                              Bedford, MA

                                    ELECTRICAL ENGINEER  LORAN-C Radio navigation

Responsible for VLF receiver systems design and high power megawatt transmitter

half cycle generator control support electronics for Accufix 7500 Loran-C product line.

EDUCATION and AWARDS:

·    Bachelor of Science Degree in Electrical Engineering, Northeastern University, Boston, MA.  Graduated with honors

·    Bachelor of Arts Degree in Mathematics, New England College, Henniker, NH,

Graduated with honors.

·    Associate in Applied Science Degree in Electronic Technology, Wentworth Institute of Technology, Boston, MA

·    Significant Contribution Award, STS-39 “Discovery”, Space Test Payload-1, NASA Goddard Space Flight Center

·    Physical Sciences Technical Achievement Award - Space Sciences

OUTSIDE INTERESTS: Amateur (Ham) Radio over 40 years callsign WA1HUM, camping, fishing, reading,                     hiking, history, recreational mathematics

Download Resume Format