Sample Template Example of Excellent Curriculum Vitae / Resume / CV Format with Career Objective for MA. in IT Electronics & Engineering with 2+Years Work Experience in Word / Doc / Pdf Free Download
Download Resume Format
PROJECT SUMMARY
Project Title : 16-Channel Active Vibration
Control Using Piezo Based Smart Structure
Organization :
National Aerospace Laboratories, Bangalore
Role Played : Analysis and Implementation of hardware and
interfacing with DSP-Toro
card
Description : The project involves design and
development of 16-channel active vibration control using piezo based smart structure. That will
control the amount of vibration on the control panel of aero plane. Interfacing
is provided such that the user can make use of different features of different
kinds of devices to the system. The user needs to have knowledge of the
behavior of these smart devices, so that the benefit of the Smart devices can
be effectively incorporated into the existing system that is planned to be
devised to improve its functionality.
Project Name : PS/2 Slave controller core using VHDL
Tools : Galaxy Simulator From Cypress
Organization : RASS IT Solutions (P) Ltd., Bangalore
Description : The PS2 controller
provides a bi-directional, synchronous serial interface between a host micro
controller and a PS/2 device (keyboard or mouse) or other compatible devices.
The PS2 controller
basically receives serial data (packet of 11 bits) from the device, digitally
filers it to improve the signal to noise performance. It further checks the parity of the data and
presents the data to the processor as a byte in its output buffer. The
controller will generate the interrupt to system when the data are placed on
the out put buffer. The device is required to acknowledge all the data
transmission. The controller has a separate transmit block and receive block,
allowing communication in full duplex mode
ROLE IN THE PROJECT
v
Developing the Hardware interface module
v
Design
of the Module in VHDL language (structural style)
v
Developed
the Module for generation of the clock, interrupt
Project Name : Hard Ware Lock
Tools : Vx-Works
5.4,Serial Port
Organization : HOBBY ELECTRONICS RESEARCH ORGANISATION.
Description : The project is to protect the software by
checking the hardware continuously which
is connected to host through the serial
port(RS232).After connecting the hardware the system will detect the hardware
and enables the application. The host will check the hard ware for every five
seconds if that hardware not detected the host system will locks the
Application.
Project Name :
Wireless Remote Pump Set Control.
Organization : HOBBY ELECTRONICS RESEARCH ORGANISATION.
Tools : Keiluv2
with Language C
Description :
The
Project is based on wireless communication. In this project the
Device can be controlled remotely using 8051 Micro controller. Wireless
Remote pump set control has two sections namely device control section and remote control section. The remote
control section is the host part of the project which controls the device
through remote. The device control
Section has 8051 micro
controller in it. The micro controller programme
is loaded into the chip. The
hardware has a transceiver which is
always
in
receiving mode (this mode is default). A manual switch is also provided
to
the user for stand alone operation.
Project Name : Interfacing a Micro
controller to the Display systems
Tools : Keiluv2 with Language C.
Organization : Bharath Electronic Limited, Chennai.
Description : The
aim of the project is to study and construct a Micro controller Based System to
interface the display devices like Liquid Crystal Display (LCD), Electro
luminescent (EL) Display, Vacuum Fluorescent Display (VF) etc.These display
devices are commonly used on instrument front panel to display any serial data
i.e. alphanumeric data, text or graphic images.
Project Name
: 16
–Bit Microprocessor Based CIS Automatic Testing Unit.
Organization :
ITI Limited,Bangalore
Description :
This project mainly deals with design of CIS(Card for ISDN Basic
Rate
Serial
Interface)AUTOMATIC TESTING UNIT. This project can be
segmented down to
1.Building the Test Jig.
2.Developing the assembly
language program for u-processor
and other peripherals.
3.Interfacing the Test Jig with
the CIS card through PC mode or
NON-PC mode.
The supporting circuitry for the
microprocessor (80c186XL)and HSCX-SAB
82525
UART –ST16C550 are developed.
FIELD OF INTEREST
v
Embedded Systems
v
Programming Micro controllers.
v
Digital
Electronics
INPLANT TRAINING
Organization :
Instrumentation Ltd., Kerala
Duration :
1 Week
Download Resume Format
.JPG)
0 comments:
Post a Comment